UNIVERSAL DENTAL SOLUTIONS

MELAG Autoclave Error Codes

What the number on your Vacuklav display means, what your staff can safely do about it, and when to call. Written by the authorised MELAG dealer and service agent for Sydney, NSW and the ACT.

First rule: if a cycle aborts before the drying phase, the load is not sterile. Repack it and run it again, then look up the error.

MELAG sterilisers, and the Dentsply Sirona DAC range that MELAG builds for Dentsply Sirona, use two different code systems. Pick your model below.

Two-line display, codes like "Malfunction F25"

MELAG Vacuklav 23 B+, Vacuklav 31 B+, Dentsply Sirona DAC Professional. The DAC Professional is the Vacuklav 23 B+ in Dentsply Sirona colours. Grey unit, small two-line text display, keys marked +, -, S and P.

Vacuklav 23 B+ and DAC Professional error codes

Colour touchscreen, codes like "Error 63"

MELAG Vacuklav 41 B+, Vacuklav 43 B+ Evolution, Dentsply Sirona DAC Premium. The DAC Premium is the Vacuklav 43 B+ in Dentsply Sirona colours. Colour touchscreen, three-digit error numbers, a QR code on the error screen for the MELAconnect app.

Vacuklav 43 B+ and DAC Premium error codes

Other MELAG models

Vacuklav 40 B+ and 44 B+ Evolution and the Pro-class share the numbered error system; use the 43 B+ guide. Euroklav and Cliniklav are closer to the 23 B+ scheme. MELAtherm washer-disinfectors and the DAC Universal handpiece steriliser have their own codes; call us with the number and we will tell you what it means.

The three faults behind most calls

  • Feed water quality. Someone topped up with tap water or the MELAdem cartridge is exhausted. Error 63/72 on the Evolution range, F25 on the 23 B+.
  • Pressure release or drain blocked. A scrap of pouch paper in the chamber filter, a kinked waste hose or a blocked siphon. Error 102/187 on the Evolution range, F04 on the 23 B+.
  • Door not sealing or not opening. Dirty seal, dry spindle, or just not waiting long enough for the chamber to equalise. Error 81/83/82 on the Evolution range, F01/F09/F12 on the 23 B+.

Universal Dental Solutions is an authorised MELAG dealer and Dentsply Sirona service partner based in Carlingford, Sydney. We service and validate MELAG and DAC sterilisers across NSW and the ACT and carry seals, filters and MELAdem cartridges on the van. Call (02) 8313 0559.

Code not listed, or still faulting?

Call (02) 8313 0559 with the model, serial number and the exact message on the display. A technician will tell you whether it is something you can clear or whether we need to come out.